熱門關鍵詞：
來源：常見問題 閱讀：203077 發布時間：2020-02-15
立式絞線機 vertical twister
絞合電纜 twsit cable
絞合補償器、節距調節器 twsit compensator
分層絞線 twsit conductor
絞合對、多股絞合線 twsit pair
扭絞節距、絞距 twsit pitch
復星絞組 twsit quadruplet
扭絞試樣成型機 twsit test specimen forming machine
絞合線 twsit wire
同向絞合 unidirectional lay
同節距絞合 unilay stranding
單位式(絞合)電纜 unit cable
單位式絞合 unit lay-up
單位屏蔽對絞電纜 unit shielded paired cable
單位式絞合 unit stranding
單位式絞纜機 unit stranding machine
單位絞電纜 unit twin cable
單位式(絞合)電纜 unit-stranded cable
單位絞 unit-stranding
單位式(絞合)電纜 unit-type stranded cable
三層同心絞合電纜、三相同軸電纜 triple concentric cable
管式絞線機、管絞機 tube strander
筒式絞線機 tubolarbloc
管(筒)籠式絞線機 tubolarbloc cage strander
管式絞線機、管絞機 tubular closer
管絞機 tubular strander
預加壓管式絞線機 tubular strander with prestressing
防噪音管式絞線機 tubular strander with sound-proof guards 管(式)絞(合) tubular stranding
管式絞線機、管絞機 tubular stranding machine
雙絞和四線組對絞電纜 twin and quad pairing cable
雙芯電纜、對絞電纜 twin cable
三層共擠 triple extrusion
雙金屬擠壓、多層一次擠出、共擠出(法) co-extrusion
共擠十字機頭 coextrusion crosshead
三層共擠 boned triple extrusion
直埋 dirdect burial
校直 straighten
輥式矯直機 straighteners
矯直 straighening
直徑 diameter
成品電纜的標稱直徑 BASFOD
線材矯直器 wire straightener
線材矯直切割機 wire straightening and cutting machine
垂直安裝[排列] vertical arrangement
立式垂直澆鑄 vertical cast
立式垂直澆鑄 vertical casting
耐垂直蠕變性 vertical creep resistance
垂直燃燒試驗 vertical flame test
垂直敷設 vertical installation
垂直升降式收、放線裝置 vertical lift pay-off and take-up
垂直升降式電纜盤架 vertical lift type drum stand
垂直偏振 vertical polarization
直升裝置用電纜 vertical riser cable
垂直敷設 vertical run
垂直懸掛試驗 vertical suspension test
垂直托架火焰[燃燒]試驗 vertical-tray flame test
垂直偏振電磁波 vertically-polarized electromagnetic wave
地下電纜、直埋電纜 underground cable
組合式輥壓模、互成直角的四輥輪拉絲模裝置 turks(-)head
互成直角的四輥輪拉絲模裝置 turks(head) roll
直徑縮小、縮徑 thinning
直通線路 through circuit
直通線路 through line
直接通信 through-traffic
定線、與….成一直線 to be flush
定線、與……成一直線 to be in line with
將金屬線拉制成大、中、小直徑 to draw wires down to large,medium,small diameters
串列式軋機、直線式軋機 tandem rolling mill
拉伸、矯直 stretching
直裂縫、裂縫[紋、口]、拼合的、分開的 split
直線式儲線器 straight accumulator
直接浸漬法 straight dipping process
平直側板 straight flange
直通接頭 straight joint
直鏈聚乙烯、線性聚乙烯 straight-chain PE
直鏈聚合物 straight-chain polymer
直線式儲線器 straight-line accumulator
直線式拉線 straight-line drawing
直線式拉線機 straight-line drawing machine
直線式拉線機 straight-line wire drawing machine
直通插頭 straight-plug
直[平]輥式拉線機 straight-roll wire drawing machine
直通接頭[連接器] straight-through connector
直線式拉線 straight-through drawing
直線式拉線機 straight-through drawing machine
直通接頭 straight-through joint
直通式壓鉛機 straight-through lead press
直通式壓鉛機 straight-through press for lead-sheathing cables
拉直、(線材)矯直 straighten
矯直的電纜試樣 straightened cable sample
矯直機[裝置]、矯直器、校直機 straightener
矯直、校直 straightening
矯直機 straightening machine
矯直輥 straightening roll
拉直、拉伸、拉緊 stretch
拉伸機、矯直機 stretcher
小(直徑)同軸對 small-diameter coaxial pair
直焊性電磁線 solderable magnet wire
直焊性聚酰亞胺漆包銅圓線 solderable polyesterimide enamelled round copper wire
直焊性聚氨脂漆包銅圓線 solderable polyurethane enamelled round copper wire 中線直接接地 solid earthing of neutral
中線直接接地 solid grounding of neutral
直接接地中線 solidly earthed neutral
直接接地網絡[系統] solidly earthed system
直接接地中線 solidly grounded neutral
直接接地網絡[系統] solidly grounded system
溶劑粘接直焊性漆包線 solvent bonding self-fluxing enamelled wire
螺桿長度 nD(D:
直徑) screw length nD
自粘直焊漆包線 self-bonding and self-fluxing enamelled wire
自粘直焊漆包線 self-bonding solderable enamelled wire
自粘直焊漆包線 self-fluxing and self-bonded enamelled wire
直焊性漆包銅圓線 self-fluxing enamelled round copper wire
直焊性漆包線 self-fluxing enamelled wire
直焊性聚氨酯漆包銅圓線 self-fluxing polyurethane enammelled round copper wire
自焊性、直焊性 self-solderability
直角連接器 right-angle adapter
直角接頭 right-angle connector
直角插頭 right-angle plug
基準面直徑 reference surface diameter
預矯直機 pre-straightener
預矯直機 pre-straightening machine
預矯直裝置 pre-straightening unit
平均直徑、層心直徑 pitch diameter
直埋式光纜 plow-in optical cable
遠程直接數據處理、遠程在線數據處理 on-line remote data processing
直接蒸汽硫化 open steam cure
標稱直徑 nominal diameter
最小出線直徑 min. final diameter
最小出線直徑 min.final diameter
最小出線直徑 minimum final diameter
不同心度、偏心度、不成直線、失配、失調、不匹配 misalignment
模場直徑 mode field diameter
低壓直流輸電信息傳輸 low transmission voltage d.c. data transmission 低壓直流輸電信息傳輸 low transmission voltage d.c.data transmission 最大允許直徑 maximum acceptable diameter
最大允許直徑 maxinum acceptance diameter
最大理論直徑孔徑 maxinum theoretical numerical aperture
線性聚乙烯、直鏈聚乙烯 linear PE
直線式儲線器 linear accumulator
直線式電纜牽引裝置 linear cable engine
大、中、小直徑 large,medium,small diameter
大直徑電纜 large-diameter cable
大號[直徑]線、粗線 large-diameter wire
大號[直徑]線、粗線 large-siza wire
大截面[直徑]電纜 large-size cables
電纜的直接冷卻[整體冷卻]、電纜的間接冷卻[單面冷卻] lateral cooling of cables
電纜轉彎的曲率半徑與電纜平均直徑、節徑比、節距比 lay ratio
進線直徑 inlet diameter
直線式單頭大拉機 in-line bull block machine
高精度線材矯直器 high precision wire straightener
耐熱直焊性漆包線 heat-resistant and solderable enamelled wire
光纖直徑 fiber diameter
出線直徑、成品線直徑 finished wire diameter
固定垂直偏振 fixed vertical polarization(
線盤)側板直徑 flange diameter
壓扁機、壓延機、矯直機、扁條拉模、拉扁鋼絲模、壓延工 flattener
矯直輥、矯正輥 dressing roll
有效纖芯直徑 effective core diameter
直埋 direct burial
地下敷設、直埋 direct burial (in earth)
直埋電纜 direct burial cable
直埋電纜 direct buried cable
冷卻水管、電纜的直接冷卻 direct cooling of cable
直接牽引拉線機 direct pull drawing machine
遠程直接數據處理、遠程在線數據處理 direct remote data processing
直接蒸汽硫化 direct steam cure
直流電壓 direct voltage
直接水冷卻電纜 direct water-cooled cable
直接波 direct wave
直流耐壓試驗 direct-current withstand voltage test
直流式壓鉛機 direct-flow lead press
直接冷卻式模架 directly cooled dieholder
雙層直角擠出機頭 double layer crosshead
不準直 decollimation
直徑控制裝置、線徑控制器 diameter control device
直接耦合 direct coupling
直接串音 direct crosstalk
直流電(流) direct current
直流電纜 direct current cable
直流電力電纜 direct current power cable
直流電阻 direct current resistance
直接拉絲 direct drawing
直接傳動 direct drive
電纜在屏蔽前的直徑 diameter of the cable beneath the shield 直徑比 diameter ratio
直徑縮小、縮徑 diameter reduction
直徑公差 diameter tolerance
十字機頭、直角機頭 cross head
十字機頭、直角機頭 cross-head
十字頭、直角機頭 crosshead
直流增音機 d.c.relay repeater
直流電壓 d.c.voltage
直流電壓強度 d.c.voltage strength
恒(向、定、流)電流、等幅電流、直流 continuous current
直流電壓 continuous voltage
銅帶矯直裝置 copper strip straightener unit
線芯直徑、纖芯直徑、(線盤)筒徑 core diameter(
纖)芯(直)徑偏差 core diameter deviation
電纜芯(直)徑比 core ratio
瞬變[斷]直流電壓 chopped d.c. voltage
包層直徑 cladding diameter
包層表面直徑偏差 cladding surface diameter deviation
同軸式直角擠出機頭 coaxial extrusion crosshead
圈線預矯直機 coil-end pre-straightenner
大截面[直徑]電纜 cable with big cross-sectional areas
直埋電纜、地下電纜 buried cable
直埋光纜 buried service lightguide
水線電碼直接打印機 cable code direct printer
電纜直徑控制 cable diameter control(
線盤)軸孔直徑、線盤軸孔直徑 bore diameter
平均纖芯直徑 average core diameter
筒體直徑、線盤筒徑 barrel diameter
線模直徑 bearing diameter
直流電力電纜 D.C. Power cable
直流電阻不平衡 D.C. resistance unbalance
直流耐壓試驗 D.C. withstand test
直流電力電纜 D.C.power cable
直流火花試驗器[機、儀] DC spark testerdiameter
直徑 DIA
導線直徑 DOA
纜芯包帶層直徑 DOCC
泡沫/實心皮絕緣的泡沫部分直徑 DOFC
雙層護套電纜的內護套直徑 DOIJ
線對直徑 DiameteroverpairsDOP
屏蔽直徑 diameterovershieldDOS
鋼屏蔽直徑 DiameteroversteelshieldDOSTL
直接淬火線桿 ED rod
高壓直流輸電子工業 HVDC(high-voltage d.c. transmission)
高壓直流輸電 HVDC(high-voltage direct current transmission)
長度與直徑之比、長徑比 L/D ratio
結構高度(對絕緣子串元件) spacing(for string insulator unit)
絕緣子串 insulator string
絕緣子串元件 string insulator unit
不平衡電流、串音電流 unbalanced current
不可懂串音、非線性串音 unintelligible cross-talk
串列式三機架線材壓扁整邊機 three-stand tandem wire flattening and edging mill
串列式三機架線材壓扁機 three-stand tandem wire flattening mill
串連 tandem
串列式退火機、連續拉絲退火機 tandem annealer
串聯、串列式布置[裝置] tandem arrangement
串聯、串列式布置 tandem connection
串列式擠出機 tandem extruder
串列式軋機、直線式軋機 tandem rolling mill
串列式線材軋機 tandem-type rod mill
實路對幻路的串音 side-to-phantom crosstalk
實路對幻路的遠端串音 side-to-phantom far-end crosstalk
實路對實路的串音、實線間串音 side-to-side crosstalk
實路對實路的串音耦合、實線間串音耦合 side-to-side crosstalk coupling
實線間的遠端串音 side-to-side far-end crosstalk
串聯電路、串聯 series circuit
串聯、串聯電路 series connection
串聯干擾電壓 series interference voltage
串聯電阻 series resistance
反射近端串音 reflected near-end crosstalk
串音 overhearing
近端串音 near-end crosstalk
近端串音衰減 near-end crosstalk attenuation
近端串音損耗 near-end crosstalk loss
近端串音 near-end talk
可懂串音、線性串音 intelligible (linear) cross-talk
間接串音 indirect crosstalk
高頻串音特性 high-frequency crosstalk performance
光纖串?dāng)_ fiber cross-talk
遠端串音 far-end crosstalk
遠端串音衰減 far-end crosstalk attenuation
遠端串音損耗 far-end crosstalk loss
遠端串音防衛度 far-end crosstalk ratio
端串?dāng)_、端串音 end cross-talk
直接串音 direct crosstalk
串音、串話 cross talk
串音[串話]特性 cross talk characteristic
串音測量[試]法 cross talk measuring method
抗串?dāng)_性 cross talk resistance
串音信號 cross-talk signal
串音、串話、串?dāng)_、串光、串色 crosstalk
串音衰減 crosstalk attenuation
串音衰減當量 crosstalk attenuation
電線電纜行業詞匯中英文對照
濕式中拉機medium wet drawing machine
中拉機medium wire drawing machine
中拉intermediate drawing
中拉機intermediate wire drawing machine
中拉機、大拉機coarse wire drawing machine
粗-細線拉線機、中拉機coarse-fine wire drawing machine
多根拉線-退火-束線機組multi-wire drawing-annealing-bunching line 四節距束線機four twist bunching machine
雙節距束線機double twist buncher
雙節距束線機double-twist bunch strander
雙節距[雙倍]束線機double-twist bunching machine
雙節距高速束線機double-twist laying-up machine
復合束線、復[混[合束線compound bunch
磨光機、束線機buffing machine
束線、束絞、束線bunch
束線、束絞bunch-strand
束絞銅束線bunch-stranded copper conductor
束線、絞合線bunched wire
束線機buncher
束線機bunching machine
灌注potting
雙面雙層十六頭紗包機 16- head double-side douoble-rosette cotton covering machine
立式雙層鼓輪vertical double draft bull block
雙層編包風雨線weatherproof double braid
雙層擠出(機)頭twin (extruder) head
雙層鼓輪拉線機twin capstan drawing machine
雙頭擠出、雙層擠出twin-head extrusion
雙層的twin-layer
橡皮絕緣雙層編包線rubber-covered double braided
雙層環氧漆包圓銅電磁線heavy epoxy-coated round copper magnet wire
泡沫皮絕緣、泡沫/實心雙層絕緣foam skin insulation
雙層編織機double tier type braiding machine
雙層鋼絲鎧裝double wire armour
雙層鋼絲鎧裝電纜double wire-armoured cable
雙層擠出(機)頭double(extruder)head
雙層編織的double-braid
雙層編織式外導體同軸電纜double-braid type coaxial cable
雙層鼓輪拉線機double-capstan wire drawing machine
雙層滾筒六頭拉線機double-deck 6 head type machine
雙層鼓輪double-deck bull block
雙層拉線鼓輪double-deck drawing block
雙層絕緣的double-insulated
雙層的double-layer
雙層一次擠出(法) double-layer coating co-extrusion
雙層擠出(機)頭double-layer extrusion head
雙層紙double-ply paper
雙絲包的、雙層絲絕緣double-silk covered
雙層擠出(機)頭dual (extruder) head
泡沫/實心雙層絕緣、泡沫絕緣dual expanded plastic insulation
雙層擠出機dual extruder
雙層繞包頭dual lapping head
雙層的duplex
雙層紙duplex paper
雙層護套、焊接的皺紋金屬管護套duplex sheath
雙層繞包頭duplicate lapping head
雙層鎧裝double armo(u)ring
雙層鼓輪double block
雙層鼓輪拉線機double block drawing machine
雙層拉線鼓輪double deck drawing capstan
雙層環氧漆包圓銅電磁線double epoxy-coated round copper magnet wire 雙層絕緣導線double insulated condutor
雙層直角擠出機頭double layer crosshead
上一頁
雙層鋼帶鎧裝double layer of steel-tape armour
雙層鋼帶鎧裝 d.s.t.a.(double layer of steel-tape armour)
雙層護套電纜的內護套直徑DOIJ
單層紙simplex paper
單層滾筒七頭拉線機single deck 7 heads type machine
單層環氧漆包圓銅電磁線single epoxy-coated round copper magnet wire 單層金屬編織機single tier type wire braiding machine
單層的single-layer
單層電纜single-layer cable
單層絞線single-layer strand
單層紙包圓銅電磁線single-paper-covered round copper magnet wire
單層紙single-ply paper
單層紙single-wire paper
單層monolayer
單層甲板大帆船galley
管式絞線機、管絞機tube strander
管式絞線機、管絞機tubular closer
管絞機tubular strander
管式絞線機、管絞機tubular stranding machine
管絞機筒體stranding rotor
高速管絞機high speed tubular stranding machine
光纖拉絲 optical fibre drawing
拉絲乳劑 drawing compounds
拉絲潤滑劑 drawing lubricants
拉絲用皂 drawing soaps8
模濕式拉絲機、八模濕拉機 wet drawing machine with 8 dies
拉線、拉絲 wire drawing
拉線模、拉絲模 wire drawing die
拉絲潤滑劑 wire drawing lubricant
拉線機、拉絲機 wire drawing miller
拉絲、拔絲 wire-draw
拉絲機、拉絲工 wire-drawer
拉絲架[機] wire-drawing bench
拉絲設備[車間] wire-drawing plant
拉絲、拔絲 wireddrawing
拉絲模(板) wortle
